Before building the actual moulds for my camper body it seemed logical to make at least one test mould and confirm that what I wanted to achieve was possible with the limited composite skills I currently have. After all… I did my trade as a Fitter & Machinist, not as a Shipwright.
Building a Fibreglass Mould Table
It’s taken a long time to get to this point, but finally I am very close to starting work on building my camper body. However, before I can start the body, there’s a few other things I need to do.
Changing over to Alloy Rims
I have always been concerned about the weight of my steel super single wheels and tyres, but at the time that I bought my truck these were the only wheels available that were legal for a 6 tonne GVM truck.